1 2 3

 Stainless Steel Rules

Contraction (Shrinkage) Rules

NORMAL CONTRACTION FOR WOOD PATTERNS
Cast Iron ...1

8
1000
Steel & Brass ...1

17
1000
Aluminium ...1 13
1000
C.I.Malleable Iron ...1 10
1000
Steel (Stainless) ...1 20
1000
Manganese ...1 25
1000
  Model No.
500mm -3- Contraction 1%, 1.5%, 2% 501 D
1000mm -3- Contraction 1%, 1.5%, 2% 501 F
500mm -4- Contraction 1.2%, 1.5%, 1.8%, 3% 502 D
1000mm -4- Contraction 1.2%, 1.5%, 1.8%, 3% 502 F
500mm Single Contraction 2.5% 503 D
500mm Single Contraction 1% 601 D
1000mm Single Contraction 1% 601 F
500mm Single Contraction 1.5% 602 D
1000mm Single Contraction 1.5% 602 F
500mm Single Contraction 1.8% 603 D
1000mm Single Contraction 1.8% 603 F
500mm Single Contraction 2% 604 D
1000mm Single Contraction 2% 604 F
CONTRACTION RULES
Contractions not listed can be supplied upon request. Listed above are contractions that apply to most metals in use today. They must not be taken too literally, but use as a guide only. Each user must judge for himself.
   
Signature Series Rules
 
 

Stain Chrome Antiglare Finish. Manufactured from Hardened and Tempered Japanese Stainless Steel. Permanently marked graduations without enamel paint in graduations. Accuracy to EEC - I Standards, i.e. ± 0.2mm at 20o C for 1000mm Rule. Calibration Certificate conforming accuracy to EEC - I International Standard (Euro Norm). Signature of Guarantee. Least count Measurement Chart. Important formula of Statistics with Chart. Area and Volume Charts. Length Conversion Table.
 

Model No. Length Width Thickness
SSC - 12 300 mm /  12 in. 30 mm 1.0 mm
SSC - 24 600 mm / 24 in. 30 mm 1.2 mm
SSC - 36 1000 mm / 36 in. 35 mm 1.5 mm
  
1 2 3

Corporate Office : "KRISLON House", Saki Vihar Road, Saki Naka, Mumbai - 400 072.INDIA.
 Tel :+91-22-2857 5567/8  Fax: +91-22-2857 4707 Email: sales@kristeel.com