Engineering Gauges > Combination Set Squares > Combination Try & Meter Square – 4 PC.
Combination Try & Meter Square – 4 PC.
SKU: Model-1516-C
Material: Stainless Steel Hardened Tempered & Cast Iron casting
Base: Casting Base Painted
Standard: EEC-I
Range: 0 - 12"
Least Count: 1mm & 1/64"
Graduation: Top Side: 1mm & 1/64" Back Side: 0.5mm/ 1/32"
Base: Casting Base Painted
Standard: EEC-I
Range: 0 - 12"
Least Count: 1mm & 1/64"
Graduation: Top Side: 1mm & 1/64" Back Side: 0.5mm/ 1/32"
Includes Ruler 90° Head, centre Square, Pro head, Scriber, & level. A very precisely ground product with good aesthetic appeal. This
world-class product comes to you in handsome attractive packing.
world-class product comes to you in handsome attractive packing.
USES:
- Use: to check and mark 90° and 45° angles. To check surface level by spirit level. To check length / depth in mm/inches.
- to check different angles from 0° to 180°, to check surface level by spirit level.
- finding and marking center point of round discs and shafts
| Model No. | Length (mm) | Width (mm) | Thickness (mm) | Type | Accuracy (+-mm) |
| 1516C | 304.8 | 22 | 2 | Rigid | Linear 0.2mm & Angular – 5 min Pro Head 15 Min |
